Combining structural-thermal coupled field FE analysis and the Taguchi method to evaluate the relative contributions of multi-factors in a premolar adhesive MOD restoration

Tunghai University Institutional Repository > 理學院 > 化學系所 > 期刊論文 > Item 310901/23131

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://140.128.103.80:8080/handle/310901/23131

题名:	Combining structural-thermal coupled field FE analysis and the Taguchi method to evaluate the relative contributions of multi-factors in a premolar adhesive MOD restoration
作者:	Lin, C.-L., Chang, Y.-H., Lin, Y.-F.
贡献者:	Department of Chemistry, Tunghai University
关键词:	Biomechanics;Finite-element analysis;MOD restoration;Taguchi method;Thermal
日期:	2008
上传时间:	2013-06-11T09:00:54Z (UTC)
摘要:	Objectives: The aim of this study was to determine the relative contribution of changes in restorative material, cavity dimensions, adhesive layer adaptation, and load conditions on the biomechanical response of an adhesive Class II MOD restoration during oral temperature changes. Methods: A validated finite-element (FE) model was used to perform the structural-thermal coupled field analyses and the Taguchi method was employed to identify the significance of each design factor in controlling the stress. Results: The results indicated that thermal expansion in restorative material amplified the thermal effect and dominated the tooth stress value (69%) at high temperatures. The percentage contributions of the load conditions, cavity depth, and cement modulus increased the effect on tooth stress values 46%, 32%, and 14%, respectively, when the tooth temperature was returned to 37 ?C. Load conditions were also the main factor influencing the resin cement stress values, irrespective of temperature changes. Increased stress values occurred with composite resin, lateral force, a deeper cavity, and a higher luting cement modulus. Conclusions: The combined use of FE analysis and the Taguchi method efficiently identified that a deeper cavity might increase the risk of a restored tooth fracture, as well as a ceramic inlay with a lower thermal expansion, attaining a proper occlusal adjustment to reduce the lateral occlusal force and low modulus luting material application to obtain a better force-transmission mechanism are recommended. ? 2008 Elsevier Ltd. All rights reserved.
關聯:	Journal of Dentistry 36 (8) , pp. 626-636
显示于类别:	[化學系所] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在THUIR中所有的数据项都受到原著作权保护.

数据加载中.....